Diaphragm Type Dry Vacuum Pumps DAT-50D
Two-stage / with thermal protector / cord with


DAT-50D
 
Features

Diaphragm type pump creates vacuum by reciprocate movement of rubber diaphragms.
Pump structure makes Oil-free environment and maintenance easy.
Various pumping speed and two/single stages are selectable depends on your required pressure and pumping volume.


Applications

Vacuum chucks, wafer and tip handling devices.
Vacuum tweezers, medical appliances.
Printing equipment.
Automatic packing machines.
Optical appliances.
Semiconductor industry.
Injection molding machine.

Specifications
  Unit 50Hz 60Hz
Actual Pumping Speed L/min 50 55
Ultimate pressure Pa 3.3 × 103
Motor   Single phase, 100V, 200W, 4P, Split phase starting
Full load current A 5.6 5.0
Weight kg 11.0
Inlet, outlet pipe diameter mm O.D. dia.12 × I.D. dia.8.5 (Rc 1/4)
Ambient temperature °C 7 – 40
Overall dimensions mm 150(W) × 232(L) × 305(H)

Caution
1. The pump is stopped when the lord is operated, and the pump can’t be operated just after that.
In this case, please return the atmospheric pressure the inside of the pump.
2. The pump will not often operate normally if it is used with corrosive gases, organic solvents, liquids, or condensed gases (eg steam).
The pump will not often operate normally if it is used with gases containing particles or dust etc.
3. A large current flows when the pump starts.
If ON/OFF of the pump power supply will be frequently done in a short time, trouble might be caused.
Please do not turn a frequent power supply on and off in a short time.
4. It is a pump only in the room.
Please do not set it up in the place, that rain and water splash, and outdoors.

Outline Drawing


Pumping Speed Curves


Optional Voltage
Voltage Applicable Volt CE Marked TUV Marked cTUVus Marked
Single phase, 100V Standard
Single phase, 200V
Single phase, 220V
Three phase, 200-220V

Contact
top of page
ULVAC KIKO, Inc.
Overseas Division
TEL (81) 45-533-0206
FAX (81) 45-533-0204
Please contact us by E-mail here


Copyright (C) 2003 ULVAC KIKO, Inc. All Right Reserved. Ver.4.00 (December 2011)
· The dimensions and specifications of the products listed in this site are subject to change without prior notice for improvement of their performance.