Diaphragm Type Dry Vacuum Pumps DA-81S
Standard type / Single-stage / with power cord/ with switch / with thermal protector


DA-81S
Features

Diaphragm type pump creates vacuum by reciprocate movement of rubber diaphragms.
Pump structure makes Oil-free environment and maintenance easy.
Various pumping speed and two/single stages are selectable depends on your required pressure and pumping volume.



Applications

Vacuum chucks, wafer and tip handling devices.
Vacuum tweezers, medical appliances.
Printing equipment.
Automatic packing machines.
Optical appliances.

Specifications
  Unit 50Hz 60Hz
Actual Pumping Speed L/min 75 85
Ultimate pressure Pa 13.3 × 103
Motor   Single phase, 100V, 100W, 4P, Capacitor run
Full load current A 2.5 2.7
Weight kg 10.3
Inlet, outlet pipe diameter mm O.D. dia.12 × I.D. dia.8 (G1/4)
Ambient temperature °C 0 – 40
Overall dimensions mm 181(W) × 336.5(L) × 217(H)

Caution
1. The pump is stopped when the lord is operated, and the pump can’t be operated just after that.
In this case, please return the atmospheric pressure the inside of the pump.
2. It is a pump only in the room.
Please do not set it up in the place, that rain and water splash, and outdoors.

Outline Drawing


Pumping Speed Curves


Optional Voltage
Voltage Applicable Volt CE Marked TUV Marked cTUVus Marked
Single phase, 100V Standard
Single phase, 200V
Single phase, 220V

Contact
top of page
ULVAC KIKO, Inc.
Overseas Division
TEL (81) 45-533-0206
FAX (81) 45-533-0204
Please contact us by E-mail here


Copyright (C) 2003 ULVAC KIKO, Inc. All Right Reserved. Ver.4.00 (December 2011)
· The dimensions and specifications of the products listed in this site are subject to change without prior notice for improvement of their performance.