Optional parts for Vacuum Pumping System

Special components

Special components

Name
Applications
Ionization Vacuum Gauge For pressure measurement from ultrahigh vacuum range to medium vacuum range.
Pirani Vacuum Gauge For pressure measurement of a low vacuum range.

Ionization Vacuum Gauge top of pages
GI-M2
Measured pressure range 5.00 × 10-89.99 × 10° Pa
Measuring accuracy ±15%
Pressure indication Digital indication
Line power AC100V±10%, 50/60Hz, 52VA
Weight 5.3 kg
Overall dimension 240mm(W) × 380mm(D) × 99mm(H)

Pirani Vacuum Gauge top of pages
GP-1G
Measured pressure range 0.4–2700 Pa
Measuring accuracy ±3% of full scale (linear scale conversion)
Pressure indication Analog indication
Line power AC100–240V, 50/60Hz, 10VA
Weight 1 kg
Overall dimension 100mm(W) × 130mm(D) × 100mm(H)
GP-1000G
Measured pressure range 0.4–2700 Pa
Measuring accuracy ±15% 51–760Pa
±30% 10–1000Pa (exclude 51–760Pa)
±50% 0.4–2700Pa (exclude 10–1000Pa)
Pressure indication Digital indication
Line power AC100–240V, 50/60Hz, 10VA
Weight 1 kg
Overall dimension 50mm(W) × 238mm(D) × 99mm(H)
top of pages

Pumping system
Pumping system

Name
Applications
Oil-mist trap For the oil mist escape prevention from an oil rotary vacuum pump exhaust port.
In-line trap For the oil mist escape prevention from an oil rotary vacuum pump exhaust port and piping connection to exhaust pipe.
Liquid Nitrogen trap For adsorption of condensation gas and back flow oil.
Automatic leak valve for Oil rotary vacuum pump For venting when a backing pump stops. (For the main pump protection from power outage)

Oil-mist trap

For the oil mist escape prevention from an oil rotary vacuum pump exhaust port.

Applicable models
<OMT-050A>
VPC-051
<OMT-100A>
VPC-250F, VFR-200M/X
<OMT-200A>
VWR-400M/X, VMR-050

In-line trap


For the oil mist escape prevention from an oil rotary vacuum pump exhaust port and piping connection to exhaust pipe.

Applicable models
<OMI-100>
VPC-250F, VFR-200M/X
<OMI-200>
VWR-400M/X, VMR-050

Liquid Nitrogen trap


For adsorption of condensation gas and back flow oil.

Applicable models
VPC-051, VPC-250F, VFR-200M/X VWR-400M/X,VTR-350M/X,
VTS-350S/X


Conversion flange

Conversion flange
Name
Applications
Flange with hose port pipe
Flange to change port diameters for vacuum rubber hose connections.
Flange with KF flange
Flange to change port diameters for KF flange part connections.

Flange with hose port pipe



A B C Applicable models
VF-25 outside dia.15 50 VPC-051
outside dia.18
VF-65 outside dia.18 100 VPC-250F
VFR-200M/X
outside dia.27
outside dia.30
VF-100 outside dia.27 100 VWR-400M/X
VTR-350M/X, VTS-350M/X
outside dia.30
*Material : SUS-304
Caution : Separately prepare the screws required for flange connections.

Flange with KF flange top of pages



A B C Applicable models
VF-25 KF-16 50 VPC-051
KF-25
VF-40 KF-40 33 VMR-050
VF-65 KF-25 100 VPC-250F
VFR-200M/X
KF-40
VF-100 KF-25 100 VWR-400M/X
VTR-350M/X, VTS-350M/X
KF-40
*Material : SUS-304
Caution : Separately prepare the screws, clamps, center rings, etc. required for flange connections.


Piping parts

Piping parts


Contact
top of page
ULVAC KIKO, Inc.
Overseas Division
TEL (81) 45-533-0206
FAX (81) 45-533-0204
Please contact us by E-mail here


Copyright (C) 2003 ULVAC KIKO, Inc. All Right Reserved. Ver.4.00 (December 2011)
· The dimensions and specifications of the products listed in this site are subject to change without prior notice for improvement of their performance.