 |
| |
Our company's Direct-drive Oil Sealed Rotary Vacuum Pump is the Sliding Vane "Gaede type". It employs oil in the vacuum pump to lubricate the rotary part and to allow sealing effect upon vacuum formation, thus obtaining a high degree of stable vacuum and high reliability. This small direct-drive motor excels over belt-driven types both in quickness of starting and pumping. |
|
| |
Unit |
50Hz |
60Hz |
| Actual Pumping Speed |
L/min. |
200 |
240 |
| Ultimate pressure |
Pa |
6.7 x 10-2 (G.V.closed)
6.7 (G.V.open)
|
| Motor |
|
Three
phase, 550W, 4 poles, Multiple-range motor
AC200-240V/380-460V |
| Full load current |
A |
3.0
(200V), 3.6 (240V),
1.8 (380V), 2.0 (415V) |
2.7
(200V), 2.8 (240V),
1.5 (380V), 1.7 (460V) |
| Oil capacity |
mL |
1,100 |
| Recommended oil |
|
SMR-100 |
| Weight |
kg |
26 |
| Inlet, outlet pipe diameter |
mm |
KF-25 |
| Ambient operation temp.range |
°C |
7 – 40 |
| Dimensions |
mm |
170(W)
x 513.5(L) x about 240(H) |
|
|
| *Ultimate pressure is measured with Macleod gauge. |
| GLD Series, compared
with G Series, is markedly upgraded. For the sake of having
the maximum performance, in addition to notes for G series,
be careful of also the followings. |
| 1. |
GLD series is capable
of reaching to a high vacuum area (10-2 Pa).
Flanges, vessels usable at a high vacuum are required. |
| 2. |
An oil-sealed rotary
pump is not recommended for continuous operation near atmospheric
pressure. |
Optional suction port
|
|
Size |
Note |
| KF-25 suction port |
KF-25 X
(50X50) |
Attached to standard
type |
| Suction pipe for hose |
 8 X M20 |
Option. 50X50adapter is needed, use
the suction pipe /50X50 adapter |
| Suction pipe for hose |
12 X M20 |
Option. 50X50adapter is needed, use
the suction pipe /50X50 adapter |
| Suction pipe for hose |
15 X M20 |
Option. 50X50adapter is needed, use
the suction pipe /50X50 adapter |
| Suction pipe for hose |
18 X M20 |
Option. 50X50adapter is needed, use
the suction pipe /50X50 adapter |
| Suction pipe for hose |
22 X M20 |
Option. 50X50adapter is needed, use
the suction pipe /50X50 adapter |
| Suction pipe for hose |
27 X
(50X50) |
Option |
| Suction pipe for hose |
30 X
(50X50) |
Option |
| A type suction pipe |
R1/4-L20 (male) X M20 |
Option. 50X50adapter is needed, use
the suction pipe /50X50 adapter |
| B type suction pipe |
Rc1/4-L20 (female) X M20 |
Option. 50X50adapter is needed, use
the suction pipe /50X50 adapter |
| C type suction pipe |
R1/4-L10 (male) X M20 |
Option. 50X50adapter is needed, use
the suction pipe /50X50 adapter |
|
Optional exhaust port
|
|
Size
|
Note
|
| Exhaust port cap |
-
|
Attached to
standard type
|
| Exhaust pipe for hose |
27 X G1 |
Option |
| KF-25 exhaust port |
KF-25 X G1 |
Option |
|
Trap for exhaust side
|
|
Model
|
Note
|
| Oil-mist trap |
OMT-200A |
Option |
| In-line type oil-mist trap |
OMI-200 |
Option |
|
Trap for suction side
|
|
Model |
Note |
| For-line trap |
OFI-200C |
Prevent counter flow of oil diffusion
into vacuum chamber, Need KF-25 clamp for attaching |
| For-line trap |
OFI-200V |
Prevent mixing powder or liquid into
the pump, Need KF-25 clump for attaching |
|
|
