|
Two-stage / with cord, plug, and switch
|
 |
| |
ULVAC KIKO's Direct-Drive Oil-Sealed
Rotary Vacuum Pumps are the sliding vane "Gaede
Type". Oil is used to lubricate the rotary mechanism
and to seal the vacuum pumping chamber, producing excellent
vacuum stability and reliability. Small direct-drive
pumps feature faster start-up and quicker pump down compared
to belt-driven pumps. In addition, ULVAC KIKO 's G-Series
Oil-Sealed Rotary Vacuum Pumps are cost-effective and
operate quietly.
G-Series pumps are available in single and dual stage versions
with pumping speeds ranging from 5 L/min. to 100 L/min.. |
|
| |
Unit |
50Hz |
60Hz |
| Actual Pumping Speed |
L/min. |
5 |
6 |
| Ultimate pressure |
Pa |
6.7 |
| Motor |
|
Single
phase,220V,40W,4 poles,capacitor run |
| Full load current |
A |
0.42 |
0.35 |
| Oil capacity |
mL |
180 |
| Recommended oil |
|
SMR-100 |
| Weight |
kg |
5 |
| Inlet, outlet pipe diameter |
mm |
O.D.
dia.12 x I.D.dia.6 |
| Ambient operation temp.range |
°C |
7 – 40 |
| Dimensions |
mm |
130(W)
x 203(L) x 159.5(H) |
|
| 1. |
Ensure the proper oil
level and oil condition are maintained at all times. |
| 2. |
Before stopping a pump
it should be vented to atmosphere to prevent the back-streaming
of oil. (Contact your local sales representative for applications
assistance.) |
| 3. |
When operating a pump
for long time above 0.1MPa, it is possible that
oil mist be exhausted from the exhaust port. Installation
of Oil mist trap (OMT Series) will eliminate this potential source of contamination. |
| 4. |
Oil-sealed rotary
pump is not recommended for continuous operation near atmospheric
pressure. |
Optional suction port
|
|
Size
|
Note
|
| Suction pipe for hose |
Dia.12 |
Attached to
standard type
|
| Suction pipe for hose |
Dia.8 |
Option |
| Suction pipe for hose |
Dia.15 |
Option |
| Suction pipe for hose |
Dia.18 |
Option |
| Suction pipe for hose |
Dia.22 |
Option |
| KF-25 suction port |
KF-25 X
M20 |
Option |
| A type suction pipe |
PT1/4-L20,male |
Option |
| B type suction pipe |
PT1/4-L20,female |
Option |
| C type suction pipe |
PT1/4-L10,male |
Option |
| Suction pipe with filter |
Dia.9 |
Option |
|
Optional exhaust port
|
|
Size
|
Note
|
| Exhaust port cap |
-
|
Attached to
standard type
|
| Exhaust pipe for hose |
Dia.12 |
Option |
| Exhaust pipe for hose |
Dia.15 |
Option |
| Exhaust pipe for hose |
Dia.18 |
Option |
| KF-16 exhaust port |
KF-16 |
Option |
| KF-25 exhaust port |
KF-25 |
Option |
|
Trap for exhaust side
|
|
Model
|
Note
|
| Oil-mist trap |
OMT-050A |
Option |
|
| Voltage |
Applicable
Volt |
CE Marked |
CSA Marked |
cTUVus Marked |
| Single phase, 100V |
Standard |
|
|
|
| Single phase, 110V (60Hz) |
 |
|
|
|
| Single phase, 115V (60Hz) |
|
|
|
|
| Single phase, 120V (60Hz) |
|
|
|
|
| Single phase, 200V |
|
|
|
|
| Single phase, 220V |
|
|
|
|
| Single phase, 230V (50Hz) |
|
|
|
|
| Single phase, 240V |
|
|
|
|
|
