|
High vacuum chemical type / Three-stages / with power cord / with switch / with thermal protector
|
 |
• |
High vacuum type diaphragm pump. |
• |
Low vibration. |
• |
High corrosion resistant. |
• |
Backing pump for TMP. |
• |
Analytical equipment. |
• |
Biochemical analysis. |
• |
Gas charging. |
• |
Vacuum drying systems. |
• |
Evaporators etc. |
|
|
| |
Unit |
50Hz |
60Hz |
| Actual Pumping Speed |
L/min |
20 |
23 |
| Ultimate pressure |
Pa |
200 |
| Motor |
|
Single
phase, 100V, 80W, 4P, Capacitor run |
| Full load current |
A |
1.46 |
| Weight |
kg |
7.5 |
| Inlet, outlet pipe diameter |
mm |
O.D.
dia.10 × I.D. dia.6 (Rc1/8) |
| Ambient temperature |
°C |
5 – 40 |
| Overall dimensions |
mm |
161(W)
× 327(L) × 217(H) |
|
| 1. |
The pump is stopped when the lord is operated, and the pump can’t be operated just after that.
In this case, please return the atmospheric pressure the inside of the pump. |
| 2. |
Please don’t suck a causticity gas, an organic solvent, liquid and condensed gas (steam etc.).
Moreover, garbage, dust and etc. must not enter in the pump. |
| 3. |
It is a pump only in the room.
Please do not set it up in the place, that rain and water splash, and outdoors. |
|
