Scroll Type Dry Vacuum Pump DISL-101
Single wrap / terminal only (without cord) with switch / with thermal protector / with air flash


DISL-101
Features

Single wrap type scroll which consists of each 1 orbiting and fixed scroll. Tough type scroll pump than DIS series against incoming particles and suitable for industrial use.

Applications

Pick and transfer system.
Cleaning and drying.
Degassing / deforming.
Packaging.

Specifications
  Unit 50Hz 60Hz
Nominal Pumping Speed L/min 100 120
Ultimate pressure Pa 20.0
Motor   Single phase, 100/115/200/230V, 300W, 2P
Full load current A 3.2/1.6/2.0
(100/200/230V)
3.7/3.4/1.8/1.7
(100/115/200/230V)
Weight kg 15.0
Inlet, outlet pipe diameter   Inlet pipe KF25 Outlet pipe KF16
Ambient temperature °C 5 – 40
Water vapor handing g/day ≤100 (A.F. open)
Overall dimensions mm 210(W) × 358(L) × 215(H)
A.F. = Air flash

Caution
1. If the pump evacuates the powder or the product, it might be damaged.
Please use the inlet filter etc.
2. Do not evacuate gas which is hazardous to humans or explosive, flammable, or corrosive.
If done, it can cause failure by gas, explosion or ignite.

Outline Drawing


Pumping Speed Curves


Optional Voltage
Voltage Applicable Volt CE Marked CSA Marked
Single phase, 100V, 115V (60Hz), 200-230V Standard

Contact
top of page
ULVAC KIKO, Inc.
Overseas Division
TEL (81) 45-533-0206
FAX (81) 45-533-0204
Please contact us by E-mail here


Copyright (C) 2003 ULVAC KIKO, Inc. All Right Reserved. Ver.4.00 (December 2011)
· The dimensions and specifications of the products listed in this site are subject to change without prior notice for improvement of their performance.