|
Double wrap
/ terminal only (without cord)
with switch /with thermal protector / with air flash
|
 |
• |
Double wrap type scroll pump which consists of 1 orbiting and 2 fixed scrolls. |
• |
Operation from atmospheric pressure is possible. |
• |
High ultimate pressure level is attainable. |
• |
Low vibration and noise. |
• |
Maintenance cycle can be controlled by hour meter. |
• |
Analytical equipment. |
• |
Gas recovery system. |
• |
Coating equipment. |
• |
Back pump for TMP. |
• |
Helium leak detector. |
• |
Manufacturing process for semiconductor. |
|
|
| |
Unit |
50Hz |
60Hz |
| Nominal pumping speed |
L/min |
500 |
600 |
| Ultimate pressure |
Pa |
1.0 |
| Motor |
Single phase |
|
100/115/200/230V, 600W, 4P, Capacitor start & run |
| Three phase |
200/208/230/380/400/415/460V, 600W, 4P |
| Full load current |
Single phase |
A |
8.5/4.3/3.9
(100/200/230V)
|
2.7/1.57/1.57/1.63
(200/380/400/415V) |
| Three phase |
10.0/8.6/4.8/4.0
(100/115/200/230V) |
2.8/2.5/2.5/1.47
(200/208/230/460V) |
| Weight |
Single phase |
kg |
44.0 |
| Three phase |
38.0 |
| Inlet, outlet pipe diameter |
|
Inlet pipe KF40 Outlet pipe KF25 |
| Ambient temperature |
°C |
5 – 40 |
| Water vapor handing |
g/day |
≤25 (A.F. open) |
| Overall dimensions |
Single phase |
mm |
290(W) × 443(L) × 397(H) |
| Three phase |
290(W) × 372(L) × 397(H) |
|
| 1. |
If the pump evacuates the powder or the product, it might be damaged.
Please use the inlet filter etc. |
| 2. |
Do not evacuate gas which is hazardous to humans or explosive, flammable, or corrosive.
If done, it can cause failure by gas, explosion or ignite. |
| 3. |
Three phases Motor is not equipped with motor protection gear.
Be sure to fit protection gear such as ground leak breaker. |
| Dimension of DIS-501, Three phase motor |
Voltage |
Applicable
Volt |
CE Marked |
CSA Marked |
Single phase, 100V, 200V, 230V
115V (60Hz) |
Standard |
 |
|
Three phase, 200, 380V, 400V, 415V (50Hz)
200V, 208V, 230V, 460V (60Hz) |
Standard |
|
|
top of page
ULVAC KIKO, Inc. |
Overseas Division |
TEL (81) 45-533-0206 |
FAX (81) 45-533-0204 |
Please contact us by E-mail → here |
|
|
|
